|
Subscribe to our newsletter!
Your email :
Air Valve
Ball Valve
Butterfly Valve
Control Valve
Cylinder Repair
Float Valve
Flow Control Valve
Gas Cylinder
Gate Valve
Glass Cylinder
Graduated Cylinder
Hydraulic Control Valve
Hydraulic Cylinder
Hydraulic Valve
Indy Cylinder Head
Master Cylinder
Oxygen Cylinder
Pneumatic Cylinder
Pneumatic Valve
Pressure Relief Valve
Propane Cylinder
Rebuilt Cylinder Head
Rrelief Valve
Solenoid Valve
Volume Of A Cylinder
ADD CATEGORY
|
SMC’s CQM Compact Cylinder with Guides Offers Excellent Non-rotating Accuracy
by
Anonymous
Tustin, CA April 15, 2004 -– The CQM cylinder incorporates slide bearings into SMC’s global standard CQS and CQ2 compact pneumatic cylinders, creating an extremely compact guided cylinder. The CQM cylinder fills a product gap between low side load non-rotating cylinders and higher load guide rod actuators, such as SMC’s MGP and MGQ guided cylinders. The CQM is designed to meet or exceed 10 million cycles, ensuring long life.
The CQM cylinder offers excellent non-rotating accuracy: 0.2 for bore sizes 12 and 16 mm and 0.1 for bores 20 to 50mm. The cylinder is designed to allow for easy mounting and adjustment of SMC’s extensive selection of position sensing switches. With 2 to 4 times the lateral load resistance a standard compact cylinder, the CQM cylinder is ideal where moderate side loading may be an issue.
The CQM cylinder has a maximum operating pressure of 1.0 MPa and is available in seven bore sizes ranging from 12 to 50mm with Imperial or Metric mounting threads/ports. Bore sizes 12-40mm have a piston speed range of 50-500 mm/s; and the 50mm bore size has a piston speed range of 50-300 mm/s. The ambient/fluid temperature ranges for the CQM are -10 to 70 deg. C without the auto switch, and -10 to 60 deg. C with switch. All inch mounting and tool plate threads available.
SMC Corporation manufactures high quality actuators and cylinders, airline and air preparation equipment, high-purity products, instrumentation, and a host of fittings and accessories applicable to the industrial automation industry. SMC has 14 production facilities, three of which are in North America –California, Indiana, and Ontario, Canada. SMC’s global presence allows them to provide quality customer service in any part of the world.
Ask for catalog ES20-179 or for more information please visit www.smcusa.com
High resolution pictures of application are available at:
http://www.phaze-9.com/PressPictures/CQM1.jpg
http://www.phaze-9.com/PressPictures/CQM2.jpg
This article courtesy of http://www.cylinder-hydraulic.com.
You may freely reprint this article on your website provided this assist notice and the author name
and URL remain intact.
Submit Your Article
|
